Mouse Over Buttons To Scroll Thumbnails/Mouse Over Thumbnails To Enlarge Photos
Truck:
Yr,Make,Model |
2020 Volvo VNR64T |
VIN: |
4V4WC9EH5LN220198 |
 |
Engine:
Make,Model,HP |
Volvo VNR64T 400 |
Vehicle Mileage: |
718,000 |
|
| Hub Mileage: |
|
Cab Type: |
Conventional |
|
Sleeper:
Make,Type,Inches |
none |
Axle:
Make,Model,Ratio |
|
|
| Suspension: |
Air Leaf |
Fifth Wheel:
Make,Type |
|
|
Transmission:
Make,Model |
Iveco ATO2612F |
Fuel Tank Size: |
100 Gallon |
|
| Fuel Tank Type: |
Aluminum |
# Of Tanks: |
2 |
Wheels:
Size,Type,Make |
22.5 Budd All Aluminum
|
|
| Additional Features: |
CD, Tilt Wheel, Jake Brake, Cruise Control, Air ride driver seat, Sun Visor, Locking Differential, AC, power windows, power mirrors |
|
| Description Of Damage: |
R&I the oil pan and inspect the main rods and bearings. Replacing oil and gasket. Allowing to inspect and magna flux the spindle and knuckle on the Rt side as well as magna flux the adle hub. Allowing to chekc the 5th wheel plate and check and scribe drive axle as well as a scan of the ECM. Rt fender is scraped up and will need to be repaired and painted to match. Allowing R&I of the hood for access of repairs and R&I on headlight and side marker lamp. Fender mirror has been displaced and cracked off its base and will need to be replaced. Allowig 2.5 hrs to buff and polish out the scrapes in the aluminum front wheel and allowing 10 lug nut covers to be replaced as the old ones were ripped off by the impact with the ditch or damaged. Rt cowl sode panel is bent up and out of shape at the top from the fire department extracting the driver this will need to be replaced. Fire department cut the front top corner on the passenger side around the windshield and removed the windshield to free the driver, the cab will need to be repalced with an LKQ. The one I found will need to have the drivers door and cowl panel moved over from the old one I added an additional 4 hours for these to be moved over. Rt side door was crushed and will need to be repalced I found an LKQ option at vanderhaags. Rt side mirror was crushed and will need to be repalced along with the antenna and wiring. Sun visor is damaged and mounts are bent these will need to be repalced along with lamps and wiring. Upper cab extender is cracked and will need to be repalced and painted to match. Photos show waviness in these cab extender panels showig the brackets are bent, replacing the brackets. Front right side fairing is scraped upand gouged in several places allowing repair 4.5 hrs for body work and refinish. Upper and lower steps were scraped up and bent these will need to be repalced. Allowing to set up and measure frame, adjust front and rear alignment, and 2 frame conditions since the truck was over on its side. Drive shaft was removed allowing to reinstall it. Right rear quarter fender is cracked and bracket is bent, allowing to replace these and R&I rubber mud flap |
|
| Comments: |
|
|
| Seller's Disclaimer: |
--------------------------------------------------------------------------
Nationwide Insurance Disclaimer: Please Read Before Bidding on Salvage
All material, salvage and/or parts sold by Nationwide Insurance are sold "As is, where is" without warranty. The description of damage is intended to give the potential salvage buyer an overview of the damage. It is not intended to be a complete list of the damage. Other damage may exist. It is the responsibility of the buyer to ascertain all relevant information before bidding on material, salvage, and/or parts sold by Nationwide Insurance.
--------------------------------------------------------------------------
 Auction Disclaimer:
Please note, each item listed for auction on Big Truck Salvage is sold "As Is - Where Is." This stipulation means that the successful bidder will purchase the item in its current condition, with all existing faults, without any warranties or guarantees, either expressed or implied.
The information provided by sellers (be they adjusters, examiners, or insurance company rep) is intended for your convenience only. We strongly advise all bidders to thoroughly examine and inspect their items of interest prior to placing a bid. It is the bidder's sole responsibility to verify the item's condition and specifics.
Big Truck Salvage expressly disclaims any responsibility for the accuracy or completeness of any information provided for each item, including but not limited to, descriptions of damage, descriptions of additional parts, mileage, and Vehicle Identification Number (VIN) details. Prospective bidders should proceed with caution.
--------------------------------------------------------------------------
|